Mohave Custom Design
Ford Super Duty F-250–F-550 No-Drill Dash Mount for Starlink Mini
Ford Super Duty F-250–F-550 No-Drill Dash Mount for Starlink Mini
Share
Secure Starlink Mini mounting without drilling your Ford Super Duty.
The Mohave Custom Design magnetic dash mount provides a clean, removable way to position your Starlink Mini above the dashboard of your Ford Super Duty F-250, F-350, F-450, or F-550.
Two heavy-duty magnets secure the mount to low-profile steel base plates installed on the dashboard with 3M VHB adhesive. Once the base plates are installed, the complete Starlink Mini mount can be attached or removed in seconds.
Choose WIDE or WIDE & TALL depending on how much vertical clearance you need. Both versions use the same mounting footprint.
Which Version Fits Your Truck?
WIDE — 2.75" × 5.7" (70 × 145 mm) mounting area
Requires a flat mounting surface at least 2.75" × 5.7" (70 × 145 mm).
WIDE & TALL — 2.75" × 5.7" (70 × 145 mm) mounting area / +1" height
Uses the same mounting footprint as the WIDE version but positions the Starlink Mini 1 inch higher for additional clearance.
Confirmed WIDE & TALL application:
2022 Ford F-250, F-350, F-450, and F-550 models equipped with the SYNC 4 12-inch screen.
Measure your available flat mounting area before ordering. Both versions require a flat mounting surface at least 2.75" × 5.7" (70 × 145 mm). Because dash layouts can vary by model year, trim, screen size, and equipment package, physical measurement is the final fitment check.
Built for Ford Super Duty
Designed for compatible Ford Super Duty F-250, F-350, F-450, and F-550 trucks, this mount keeps your Starlink Mini securely positioned above the dashboard without drilling holes or permanently modifying the vehicle.
The low-profile magnetic system gives you a strong mounting point while still allowing the entire mount to be removed when Starlink Mini is not needed.
Manufactured from UV- and heat-resistant black ASA, the mount is built for the demanding temperatures and conditions found inside truck interiors.
Features
- No drilling or permanent dashboard modification
- Designed for Starlink Mini
- Compatible with Ford Super Duty F-250 through F-550
- WIDE and WIDE & TALL height options
- Same 2.75" × 5.7" mounting footprint on both versions
- WIDE & TALL raises the Starlink Mini 1 inch higher
- Two heavy-duty 65 lb magnets
- 3M VHB-backed steel mounting plates
- Removable magnetic mounting system
- UV- and heat-resistant black ASA construction
- Installs without permanent vehicle modification
Size & Fitment
Always measure your dashboard before ordering.
| Version | Minimum Flat Mounting Area | Height |
|---|---|---|
| WIDE | 2.75" × 5.7" (70 × 145 mm) | Standard |
| WIDE & TALL | 2.75" × 5.7" (70 × 145 mm) | +1" |
Known WIDE & TALL Applications
- 2022 Ford F-250 with SYNC 4 12-inch screen
- 2022 Ford F-350 with SYNC 4 12-inch screen
- 2022 Ford F-450 with SYNC 4 12-inch screen
- 2022 Ford F-550 with SYNC 4 12-inch screen
What’s Included
- Starlink Mini mounting bracket
- Mounting base
- Two 65 lb, 70 mm (2.76") heavy-duty magnets
- Two 3M VHB-backed steel mounting plates
- 1/4"-20 mounting bolt and washer
Installation
Quick, no-drill installation.
- Confirm the entire mounting footprint sits on a flat, level section of the dashboard.
- Thoroughly clean the mounting surface with isopropyl alcohol.
- Apply adhesion promoter and allow it to dry for approximately 5 minutes until tacky.
- Remove the backing from the 3M VHB adhesive.
- Position the steel base plates and press very firmly into place.
- Allow the adhesive to cure before applying maximum load.
At room temperature, 3M VHB typically reaches approximately 50% bond strength after 20 minutes, 90% after 24 hours, and full bond strength after approximately 72 hours.
Download Installation Instructions
Download Complete 3M VHB Application Instructions
No-drill installation · Made in Arizona
Ships in 2–3 business days · Fitment help available
